Home > Curriculum and Activities >X Teacher's Guides

Teacher's Guides

Sort by:
select

Design for Speed challenges students to apply STEM knowledge and design skills. Students engage in competitive engineering with the goal of creating the fastest and most eye-pleasing balsa wood or basswood dragster. They first develop a car concept and then build it. After a battery of tests and a speed test of their prototypes, they head back to the drawing board. Students analyze their cars for drag, mass, lift, and conformity to specifications, all with the aim of making the fastest car in the room for the culminating Day at the Races event. An aesthetics competition provides an added dimension and entices students who have an artistic flair.

Extensive web support is included such as online data tracking and exclusive access to instructional videos for each phase of the activity. Teacher familiarity with tool use and woodworking methods is required. The units include 25 Balsa Wood or Basswood Metric Dragster Kits, 24 Metric Dragster Go/No Go Gauges, a Science of Speed Design for Speed Teacher Guide, 24 student logbooks, 100 multiview drawing sheets, and more. The dragster launcher is sold separately.

Options Available
From $995.00

The principles of the science of speed – aerodynamics, thrust, friction, Newton’s laws of motion, and so on – are at the heart of many of the most exciting applied physics and engineering projects. Let’s Get Moving, the three-week introductory unit for the Science of Speed 2 program, teaches these concepts through several projects: a pop can engine, a balloon rocket, and air-powered bottle racers. Students not only build their vehicles, they also test them and interpret data for the purposes of reengineering. Each project successively builds on the others, and at the end of the unit, students are ready to move on to the next phase in the Science of Speed process.

The unit can stand alone and comes with everything you need to successfully complete the activities, including 24 AP Bottle Racer Kits, an AP Bottle Racer Launcher, a Science of Speed Let's Get Moving Teacher Guide, 24 student logbooks, and more. The Science of Speed 2 program comes with extensive web support such as exclusive access to instructional videos for each phase of the activity.

$865.00

Don’t let students wing it – have them design CO2 dragsters using engineering concepts. This guide starts the process by teaching them about the engineering design process. As they work through the activities and design their own dragsters, students will learn about:

  • Specifications
  • Newton’s laws
  • Identifying and minimizing friction
  • Bearing surfaces
  • And much more!

Using the knowledge gained, they then complete two challenges that test their ability to evaluate and make design changes to improve their vehicles.

Student materials in the guide are reproducible for distribution in your classroom. Use this guide as a supplement or use the series as the base for an engineering design course.

Equipment and materials needed to complete guide activities include the Pitsco EZ Build Dragster 32-Pack; basswood and balsa wood dragster class pack; Go/No Go Gauge; Roll Test Ramp; dragster parts such as plastic wheels, axles of various materials, brass rods, straws, washers, axles, and Precision Bearings; caliper; drill press or drill; coping saw; long-nose pliers; Phillips screwdriver; metal saw; tubing cutter; digital scale; bench pulley; measuring tape; modeling clay; sandpaper; graphite and Teflon lubricant; and standard classroom tools and materials. Note: This list is for all activities; individual activities don’t require all listed materials.

$39.95

This guide continues the process of guiding students not only in designing and building an excellent dragster but also in understanding the science and technology principles that make this happen.

Production and Fine Tuning delves into the importance of carefully aligned axles, quality paint finishes, and more topics that go beyond shaping and basic construction. Some of the principles explored are:

  • Alignment and drift
  • Rolling and sliding friction
  • Aerodynamic drag
  • Specifications and trade-offs
  • Symmetry

Student materials in this guide are reproducible for distribution in your classroom. Use this guide as a supplement or use the series as the base for an engineering design course.

Equipment and materials needed to complete guide activities include the Pitsco Metric Dragsters – Getting Started Package (kits, launcher, and more), straws, modeling clay, digital scale, Roll Test Ramp, measuring tape, drill press or hand drill with 3/16" bit, spring scale, meterstick, shaping tools (for example, coping saw and rasp), dragster body blanks, try square or drafting right triangle, C-clamp, protractor, pulley, spray paint, and standard classroom tools and materials. Note: This list is for all activities; individual activities don’t require all listed materials.

$39.95

Students start designing their own CO2 dragsters, produce a foam prototype of their dragsters, and then create a finished Custom Cruiser model. The culminating activity is to deliver a polished presentation about the process of creating the Custom Cruiser.

Through these activities and challenges, students learn about and apply several concepts:
  • Thumbnail sketches
  • Scaling
  • Orthographic drawings
  • Drafting and tools for drafting
  • Modeling

Student materials in the guide are reproducible for distribution in your classroom.

Equipment and materials needed to complete guide activities include the Pitsco Custom Cruiser 25-Pack, digital scale, measuring tape, Roll Test Ramp, drafting board, T square, 30°/60°/90° triangle, compass, drafting pencil or lead holder, French curve, sandpaper sharpener, freehand hot-wire cutter, acrylic spray paint, hand drill with 1/8" bit, carving tools, drill press, band saw, safety glasses, digital camera and digital video camera, photo- and video-editing software, presentation software (PowerPoint), plastic wheels, straws, steel axles, modeling clay, expanded polystyrene foam blank, drafting tape, balsa wood sealer, and standard classroom tools and materials. Note: This list is for all activities; individual activities don’t require all listed materials.

$39.95

Fuel your students’ fire for learning by combining the F1 in Schools Challenge with these curriculum guides.

The Middle School edition features four science and three math lessons that focus on principles such as the scientific method, acceleration, converting a 2-D drawing into a 3-D model, and more. The High School edition includes five science and four math lessons covering reaction time, Newton’s three laws of motion, Bernoulli’s principle, correlations, surface area, and other key concepts.

Each guide also lists the NSTA, NCTM, and ITEEA standards addressed by each activity.

Options Available
From $24.95

A must-have for teachers embarking on the Pitsco Custom Cruiser Vehicle Design activity. This book takes you through the entire activity including design concepts, CAD drawings, clay modeling, vehicle construction, and testing. Contains many helpful suggestions for implementing this activity in your classroom.

$21.25
First PagePrevious Page
1
Next PageLast Page
Products to display:
select
   Items 1 to 7 of 7
First PagePrevious Page
1
Next PageLast Page
Products to display:
select
   Items 1 to 7 of 7

Narrow By: