Home >X Tools >X Building

Building in Tools

Items 1 to 16 of 41
Sort by:

This scroll saw replacement pack comes with 18 blades (6 of each). The end of each blade is a pin type, and the blades are 5" in length.

The three types of blades included in this pack are:

  • No. 41101 regular tooth, 0.100" width, 0.018" kerf, 15 TPI for medium turns in wood 3/32" to 1/2" thick.
  • No. 41201 regular tooth, 0.100" width, 0.018" kerf, 10 TPI for medium turns in wood 1/4" to 1" thick.
  • No. 42401 skip tooth, 0.100" width, 0.010" kerf, 18.5 TPI for sharp turns and thin cuts in wood 3/32" to 1/2" thick.

$15.95

The Pitsco Wheel Deal is the ideal tool for CO2-dragster wheel assembly. The Wheel Deal is a handy tool designed with two comfortable presses – one for hub insertion into a wheel, the other for final assembly of the wheels, washers, and axles onto the dragster. We’ve even included axle-height locators as an added feature. No more stubborn hubs, broken wheels, or difficult axles!

The Wheel Deal is a unique four-in-one tool that simplifies the following tasks of dragster building:

  • Marking axle height accurately
  • Assembling wheels and hubs
  • Inserting axles into wheels
  • Mounting wheels on car (reducing car damage)

$26.50

Designed especially for use with an airbrush, this compressor delivers 30 to 40 psi. It does not require oil, which makes it maintenance free. 110 V, 60 Hz, 1.5 amp.

$180.50

Achieve a new level of finish quality on your scale models, dragsters, model rockets, and other projects with this Paasche VL series airbrush set featuring a double-action siphon feed. Kit includes a variety of nozzle and needle sizes, extra fluid containers, a wrench, an air hose with couplings, a glass bottle, and other necessary hardware. Packaged for instant hookup to air source.

$104.00

This improved design does a better job of holding your dragster during the painting process. The dragster is suspended by the cartridge hole. After it is on the stand, the dragster can be rotated (by turning the mounting peg) to paint all sides. Special plastic material enables the wet paint to be wiped off the stand. Also makes a great display for finished dragsters!

$5.45

Six-foot airbrush hose with couplings ideal for use with all Paasche airbrushes. Constructed for durability with multicolored nylon braid over plastic tubing. Complete with airbrush and compressor couplings.

$5.75List $9.65 (41% off)

This sander does double duty in classrooms and technology labs. Featuring a 1" x 30" belt sander and 5" disk sander, this tool is ideal for grinding, deburring, sharpening, sanding, and buffing wood and metal.

Sander specifications:

  • Belt width:1"
  • Belt length: 30"
  • Disc diameter: 5"
  • Voltage: 120 V/1 pH/60 Hz
  • Belt speed: 3,340 ft/min
  • Disc speed: 3,450 rpm
  • Table length: 5"
  • Table width: 7.25"
  • Table tilt: 45 degrees
  • Dust collection outlet size: 1.5"
  • Motor: 1/3 hp

$195.95

Multiuse, single-speed, high-speed rotary tool for all your precision cutting, sanding, polishing, grinding, sharpening, and drilling needs! Includes mandrel, coarse 1/2" sanding drum, dressing stone, emery wheel, 120-grit sanding band, and aluminum oxide and silicon carbide grinding stones.

$80.00

Perform intricate cutting, sanding, and polishing tasks in hard-to-reach places with this super-handy tool. Two speeds: 6,500 and 14,000 rpm. Package includes rotary tool, battery pack, three-hour battery charger, high-speed cutter, drill bit, wire brush, drum sander, and sander band.

$72.00

Metal alloy body with high-impact-resistant, black-molded handle. Ribbed section on front of body permits comfortable two-hand use of tool. Regular-cut, flat blade.

$15.85

Designed to create more precise angles and tighter joints for balsa wood and basswood structures – as well as to deburr axles for dragsters – the Lil’ Termite Sander is a simple device to operate and clean. You and your students will be amazed at the difference the Lil’ Termite Sander makes on the overall strength and precision of structure joints.

To create angles for wood structure pieces, mark the desired angle on the wood piece, place it flat on the sanding table, and push the piece against the sanding disc until it is sanded to the marked line. Or, use the etched miter angles on the sanding table. To deburr axles, lightly hold the axle at an angle to the rotating sanding disc and turn the axle until those burrs are history!

Lil’ Termite dimensions are 5" x 3" x 2-1/4" with a round sanding surface 1-1/2" in diameter. Includes five sanding discs and a sanding disc cleaner. Uses 110-120 VAC wall outlet.

$61.50

Sand, scrub, remove rust, polish, and detail – the Mouse Sander/Polisher from Black & Decker does it all! Its interchangeable bases help you squeak in and around tight spaces and corners. The lightweight, compact design and soft grips make it remarkably easy to control and comfortable to use. A hook-and-loop fastening system makes paper changes fast and easy. Includes kit box and 14 accessories.

$105.00

Great for shaping and smoothing wood, plastic, and metal in hard-to-reach areas; especially good for those nooks and crannies on shell-style and rail dragsters. Six different files can be inserted in the metal handle.

Includes round, half-round, flat, and triangle files.

$10.95

When your Lil’ Termite Sander finally eats through the discs it comes with, just grab another pack of these Replacement Sanding Discs. When regularly maintained with the sander’s sanding disc cleaner, these last a long time!

$4.35

Get ready to put your Dremel or other rotary tool to the test with this 180-piece set. Includes:

  • Dressing stone
  • 2 fiberglass-reinforced cut-off wheels (1-1/2")
  • 1 fiberglass-reinforced cut-off wheel for plastic (1/2")
  • EZ Lock Mandrel
  • 2 aluminum oxide grinding stones
  • Silicon carbide grinding stone
  • 5 felt polishing wheels (1/4")
  • 5 felt polishing wheels (1")
  • Polishing compound
  • Carbon steel brush
  • Sanding band and mandrel, 60-grit (1/2")
  • 15 sanding bands, 60-grit (1/2")
  • 25 sanding discs, 180-grit (3/4")
  • 25 sanding discs, 220-grit (3/4")
  • 25 sanding discs, 240-grit (3/4")
  • Sanding band and mandrel, 60-grit (1/4")
  • 15 sanding bands, 60-grit (1/4")
  • 15 sanding bands, 120-grit (1/2")
  • 15 sanding bands, 120-grit (1/4")
  • High-speed cutter
  • Mandrel
  • Screw mandrel
  • Wrench
  • Other various accessories

$47.75

Round, regular-cut, hardened-steel blade with a hardwood handle.

$19.00
First PagePrevious Page
123
Next PageLast Page